Ever had problems fitting wheels to your car due to the size and weight of them?

Simply hand tighten the Wheel hanger in the bolt hole closest to 12 o'clock. Offer the wheel up to the hanger and once through, the hanger will comfortably hold the weight of the wheel while you insert 4 of the 5 bolts into the wheel. Once these are hand tight, remove the hanger and fix the last bolt. Obviously all bolts will need to be tightened to the appropriate specification.

Made from corrosion resistant stainless steel, machined with a M14 x 1.5 thread on one end & drilled with a 1/4" Tommy bar hole - (6" total length). Supplied in a platic tube for safe storage when not being used.

Priced individualy but past customers often purchase two at a time to make fitting even easier!