Engine - Cylinder Head

100241

Upper Spring Seat For: 365 GT4 2+2, 365 GTB4 (Daytona), 400 GT / 400 Auto, 400i, 412..

£21.78

100273

#100273 - Nut (Distributor Housing) 250 GT 2+2 (GTE), 250 GT Berlinetta Lusso, 275 G..

£8.95

100274

#100274 - Distributor Retaining Bolt 250 GT 2+2 (GTE), 250 GT Berlinetta Lusso, 275 ..

£12.10

100294

Gear..

£335.00

103181

See Hill Part number :H01-01917..

126646

Cylinder head nut (M10x1.0p)..

£11.50

16177

#16177 - Rocker Shaft Pin Precision ground and dimensionally correct to original fac..

£72.00

16643

#16643 - Camshaft Roller Comes complete with 9160780 bush pre-assembled and precisio..

£62.00

16643-1000

#16643-1000 - Camshaft Roller Comes complete with 9160780 bush pre-assembled and pre..

£62.00

16643-2000

#16643-2000 - Camshaft Roller Comes complete with 9160780 bush pre-assembled and pre..

£62.00

17401

#17401 - Spacer ( Thrust washer - rocker pin) Made from the correct original specifi..

£7.40

17880

Tappet Adjusting Screw. Much improved part over parts that are currently in the offi..

£16.95

4146619

4146619 Cylinder head nut for 246, 250, 275, 330, 365GTB4..

£12.95

4146619-DOME

4146619-DOME- Special domed head version. Cylinder head nut for 246, 250, 275, 330, ..

£14.95

9160077

#9160077 - Distance Bush Made from Original Specification material used on original ..

£22.00

9160224

#9160224 - Pivot - Oversize (14.490mm) Hardened and precision ground This is anothe..

£30.00

9160781

#9160781 - Pivot. Hardened and precision ground This is another "Hill Improved" par..

£30.00

93044

#93044 - Stud..

£9.40

93218

Hollow Dowel - Precision Ground 250 Europa, 250 GT 2+2 (GTE), 250 GT Berlinetta Luss..

£7.40

93818

93818 Tappet Adjuster Nut...

£6.95

94300

Rocker Housing Stud. Identical to Factory part but made from high tensile steel. (R..

£15.95

94803

#94803 - Exhaust Nut 206 GT Dino, 246,Dino GT (To Ch 01116), 250 GT 2+2 (GTE), 250 G..

£7.20

CHW200X102X040BL

Hill Part number - CHW200X102X040BL - Cylinder Head Washer 20.0mm OD x 10.2mm ID x 4..

£2.80

CHW200X111X053BL

Hill Part number - CHW200X111X053BL - Cylinder Head Washer 20.0mm OD x 11.1mm ID x 5..

£2.80

H01-01917

Hill Part number :H01-01917 M8 x 1.0p - 14mm A/F Hex Nut These nuts surpass the or..

£3.85

RCS-0640-001

RCS-0640-001 Rocker Cover Stud - 64mm Long ( M6 Thread) Classic V12's..

£8.80

RCS-0740-001

RCS-0640-001 Rocker Cover Stud - 74mm Long ( M6 Thread) Classic V12's..

£9.60