Hill Engineering Ferrari Part
Front brake caliper piston set for 360 Stradale, 430, 430 Scuderia, 430 Challenge & 5..
£215.00
Dust Seal kit for BCP-360CS-F
2 x 30mm
2 x 34mm
2 x 38mm..
£38.59
Brembo Front brake caliper piston Seals for 360 Strad, 430 & 599 with CCM disks. (6 s..
£38.59
Complete car kit of Pistons, Fluid seals and Dust seals for 360 Stradale, 430 & 599 w..
£814.00
Rear brake caliper piston set for 360 Stradale, 430, 430 Scuderia, 430 Challenge & 59..
£145.00
Dust Seal kit for BCP-360CS-R
2 x 38mm
2 x 42mm..
£25.73
Brembo Rear brake caliper piston Seals for 360 Strad & 430 with CCM disks. (4 seals)
..
£25.73
38mm Diameter Brake Caliper Piston for all 360 and 430 non CCM disk cars.
Made to ex..
£26.00
42mm Diameter Brake Caliper Piston for all 360 and 430 non CCM disk cars.
Made to ex..
£26.00
Dust Seal kit for BCP-612-F-CCM
2 x 28mm
2 x 32mm
2 x 38mm..
£38.59
Brembo Front brake caliper piston Seals for 612 with CCM disks. (6 seals)
(Please no..
£38.59
Front brake caliper piston set for 612 with CCM disks.
Stainless steel ground & elec..
£215.00
360 upper gearbox bush removal tool
(#AV 3219) (95973219)
Please note that this too..
£180.00
Spare Nut for BRT-01 extractor..
£35.00
Spare bolt for BRT-01 extractor..
£45.00
Press tool for removal and insertion of the 42mm Flanblock bush on shock absorbers on..
£68.00
Clutch Alignment tool - 348/355
Suitable for single & dual plate clutch..
£55.00
Clutch Alignment tool - 360/430..
£42.00
Clutch Alignment tool - Testarossa, 456, 512TR, 512M, 550, 575, 612 and others with -..
£65.00
Clutch Alignment tool - 512BB & 512BBi etc - 1.250" 10 spline
#95972666..
£65.00
Hill Engineering is proud to introduce a complete kit of part to convert the dated tw..
£3,495.00
Hill Engineering is proud to introduce a complete kit of part to convert the dated tw..
£3,495.00
Hill Part number - CHW200X102X040BL - Cylinder Head Washer
20.0mm OD x 10.2mm ID x 4..
£2.80
Hill Part number - CHW200X111X053BL - Cylinder Head Washer
20.0mm OD x 11.1mm ID x 5..
£2.80
Uprated Clutch Release Bearing for all 355 F1 - pre fitted with OEM seals. (#170182 /..
£480.00
Uprated version of #168594 Clutch release bearing complete with pre-fitted OEM seals...
£440.00
Hill Engineering's Clutch Release bearing for 360F1 & 430 F1 & Scuderia (#234953) - P..
£440.00
Hill Engineering's Clutch Release bearing for 360 & 430 Manual (#234943) - Pre fitted..
£440.00
August 2015 - Important information regarding the 512TR Clutch Flange 154511 Flange -..
£475.00
CRB-512TR-KIT
512TR with engine number 33998 and lower will have the older designed ..
£1,190.00
Hill Engineering's Clutch Release bearing for all F1 transmission:
575M F1 & 612 F1
..
£580.00
#166434 Clutch release bearing complete with pre-fitted OEM seals.
For Ferrari F50
..
£520.00
Hill Engineering's Clutch release bearing flange for 360 and 430 (#207539)
Comes com..
£495.00
Hill Engineering's Clutch release bearing flange - (#168589)
Used mainly to upgrade ..
£745.00
Our ChromeSaver socket is a must for any Ferrari owner who takes looking after their ..
£49.95
360 Yellow Replacement Tachometer face.
Installation requires removal and disassembl..
£90.00
Dino Spare Wheel Hold Down..
£162.00
4 Lobe Cam - (Distributor)..
£165.00
S159B Distributor Rebuild Kit
For All 308's that use the S159B Distributor...
£190.00
S85A Distributor for 250, 275, 330.
Over two years in development the first of a num..
£1,450.00
Hill Engineering’s answer to the broken door levers on the 355 - Why replace the whol..
£85.00
Hill Engineering’s answer to the broken door levers on the 355 - Why replace the whol..
£85.00
Hill Engineering’s far superior solid billet machined door lock pin for the 348 & 355..
£54.00
Hill Engineering’s answer to the broken part on 328 door mirrors.
Why replace the wh..
£82.00
Hill Engineering’s answer to the broken part on 328 door mirrors.
Why replace the wh..
£82.00
RHD 308 GTB/GTS
Note: It is highly recomended to visualy check your existing pedal i..
£49.00
Dead pedal for RHD 308 GT4
Note: It is highly recomended to visualy check your exist..
£49.00
RHD 328 GTB/GTS
Note: It is highly recomended to visualy check your existing pedal i..
£49.00
RHD 348/355
Note: It is highly recomended to visualy check your existing pedal is th..
Aluminium Dead pedal for all RHD 360 and 430
Note: It is highly recomended to visual..
£49.00
LHD 456 dead pedal
Note: It is highly recomended to visualy check your existing peda..
Hill Engineering's 458 / 488 billet aluminum dead pedal
Fits both LHD and RHD cars a..
£79.50
LHD F40 Dead Pedal..
£999.00
LHD Mondial 8 Dead Pedal..
£49.00
LHD Mondial T Dead Pedal..
Drivers dead pedal for 308 GT4 LHD..
£49.00
This Dead Pedal fits all 348 & 355 Spider.
Note: It is highly recomended to visualy ..
£49.00
LHD 360 and 430 cars - Manufactured from a solid billet of aluminium - not to be conf..
£125.00
Exhaust diverter bolt kit F355 - M2.7
160050 (x2) Bolt
12646778 (x4) Washer
114749 (..
£28.00
Exhaust diverter bolt kit F355 - M5.2
164557 (x2) Bolt
12646778 (x4) Washer
114749 (..
£26.00
Fed up with cracked OEM clamps? - Vastly superior billet 304 stainless exhaust clamps..
£99.50
The EC-LG01 exhaust clamp set for the Lamborghini Gallardo. Based on the Ferrari 355 ..
£118.00
At last - The answer to the horrible looking stock 430 exhaust tips!!
Made from 304 ..
EWH-01 - Emergency Window Handle for 308 and others.
Identical to original part with..
£110.00
Flange Nut - M6 - Moly coated..
£1.50
Flange Nut - M8 - Moly coated..
£2.10
Gate Lock For 308, 328, 348, F40, 288, Dino, Mondial, & Testarossa - Black Anodisesd..
£79.00
Gate Lock For 308, 328, 348, F40, 288, Dino, Mondial, & Testarossa - Clear Anodisesd..
£79.00
Gate Lock for 355.Black Anodise..
£88.00
Gate Lock for 355 Clear Anodise..
Gate Lock for 512TR/M.Black Anodise..
£88.00
Gate Lock for 512TR/M Clear Anodise..
£88.00
5 Speed gearknob - Upper Left Reverse
The most popular knob that we sell for the 5 s..
£55.00
6 Speed gearknob - Lower Left Reverse
For F355/F360
(47mm, Anodised & Black infill ..
£55.00
6 Speed gearknob - Upper Left Reverse
For 456/550/575 etc.
(47mm Anodised & Black i..
£55.00
5 Speed gearknob - Lower Right Reverse..
£55.00
Gear Knob Stand !
Stainless steel stand for all M10 x 1.25p Gear knobs. Felt based s..
£42.00
Hill Part number :H01-01917
M8 x 1.0p - 14mm A/F Hex Nut
These nuts surpass the or..
£3.85
Hill Part number :H01-01956
12mm Wave washer - As per original specification and us..
£18.00
Hill Part number :H01-01957
10mm Wave washer - As per original specification and us..
£16.00
Hill Part number :H01-01958
8mm Wave washer - Oversize OD 17mm as per original spec..
£14.00
Hill Part number :H01-01959
8mm Wave washer - OD 15mm as used on Classic V12 Engin..
£14.00
H01-01962-902
1.90mm Differential Plate..
£65.00
H01-01962-903
2.00mm Differential Plate..
£65.00
H01-01962-904
Splined Friction Plate..
£65.00
H01-01962-911
Differential Belleville Washer..
£52.00
H01-01963 ( Hill Part number as no Ferrari part number)
Carburettor Trumpet for Clas..
£580.00
Hill Part Number - H01-01964
M12x1.25p Ultra High Precision Nut - Daytona Mains..
£6.20
Hill Part Number - H01-01965
Rivet (R12 Ferrari Ref) -365GT 2+2 Waterpump Impeller e..
£7.00
H01-01971 Clutch Cover Bolt
M8 x 1.25p x 18mm
13mm Hex
It is advised to check the ..
£8.50
H01-02211 - Split Nut
Used to repair the oil pipe nut on Maserati 4200 without havin..
£115.00
H01-02215
DOME HEAD BOLT M6x14..
£10.40
22 Spline Gauge for checking spline wear on 355 Flywheel (and Crank)
This gauge has ..
£165.00
Complete set of Hill Engineering Design 488 Challenge Bushes (14).
After being appro..
£1,850.00
Seat Spacer Kit for Carbon seats (458/488)
Kit comprises of:
4 x 10mm Spacer
4 x 2..
£136.00
HP-001 - Door Hinge pin (Dino) made from high tensile steel, blacked finish with grea..
£22.50
HP-002 - Door Hinge pin (Dino oversize) made from high tensile steel, blacked finish ..
£22.50
HRNT-01 - HUB RETAINING NUT TOOL FOR #70858-S & #70858-D..
£80.00
Short Heel Toe Pedal (456, 550 etc)..
Showing 401 to 500 of 805 (9 Pages)