Hill Engineering's Clutch release bearing flange - (#168589)

Used mainly to upgrade 348 & early 355's so that they can use the later style clutch release bearings

 Comes complete with 2 x #65928500 at no extra cost. (These must be fitted by the customer)

CRB355MS / #168594 should only be fitted the later style flange (CRBF 348/355 - #168589) & 158209 (late 355). An easy way to tell if you have the later flange is by measuring the spring hole centers shown in the additional image above. Early flanges have a dimension of 82mm while the later flange as shown has 86mm.

Please note that this flange is not a replacement for the late 355 flange #158209

Valid from gearbox Nr. 2439 and till Nr. 2715 for complete gearbox 168372 - Not for complete gearbox 174037 

(Also Valid up to Gearbox Nr. 2438 when using CRB-355MS Clutch Release Bearing)

Please note that this part does not come with seal or O-rings - See SK-CRBF-348/355